Details

---

Tornado™ DC5200VTiD are heavy duty, fan cooled, IGBT based inverter controlled power sources meant for MMA / TIG (scratch-start) welding. Control panel protected against accidental impact. Extreme power to weight ratio in a most compact format. Rugged composite casing for durability in the roughest environments. For professional MMA welding with electrodes up to 8mm with a high duty cycle of 500 A at 80%. Ideal for operation in high ambient temperatures. The machine automatically provides operators with the optimal start and stop parameters based on the set welding current. A booster circuit provides additional voltage for superior cellulosic arc starts and welding performance.

MMA Welding

A wide current range and powerful welding performance make the Tornado™ DC Arc machines suitable for a wide range of applications and electrode types such as:

• General purpose

• Stainless steel

• Cellulosic

• Low-hydrogen

Hot Start

• To improve the arc striking with the most difficult electrodes.

ARC Force

• To choose the best are dynamic characteristics.

TIG Welding

• The Tornado™ DC Arc machines are capable of performing TIG welding with precise current control. All you need is an optional TIG-torch with a gas valve, a gas regulator and a cylinder of gas. You can weld mild steel or stainless steel material with or without filler material.

VRD is short for Voltage Reduction Device

• VRD reduces the welding power source’s open circuit voltage (OCV) to a safe value until welding commences. OCV is the voltage measured across the terminals when not welding.

Processes

• DC STICK (SMAW)

• DC Lift-Arc TIG (GTAW)

Specifications

Model	DC5200VTiD
Input Voltage	415V 3 Phase 50Hz
Rated Current	500A
Input Power	22.5KVA
Input Amp	30A
Amp Range	30 – 500A
Output Voltage	36V
O. C. V	70V DC
IP Rating	IP23
Duty Cycle	60%
Net Weight	35 kg
Machine Dimension (mm)	635 x 305 x 575