Details

---

Built for professionals in the manufacturing / fabrication, the STORM 500i allows welders of fabrication segment, the STORM 500i allows welders of all skill levels to be more efficient for all their MIG, Stick, Lift TIG and Plasma Built-in Compressor for welding and cutting needs. Setup is quick and easy, letting operators have faster uptime and weld with confidence.

STICK (SMAW)

• Built-in Arc Force to automatically select the best welding arc dynamic characteristic
• All the data refer to 40ºC environment temperature as imposed by the standards
• Automatic Hot Start to improve the arc striking with the most difficult electrodes
• Automatic compensation for mains voltage fluctuations within +15% -20%
• Excellent welding characteristics with any type of electrode

Plasma (PAC)

• No heavy cylinder
• Elimination of dangerous combustible gases such as acetylene and propane, assure high safety.
• When air supplied after electric arc proceed between edge of electrode and base metal, the air through the arc current becomes ionized by chemical processing and divided into electronic & positive ion, mixed high temp jet gas.
• No Skill are required to accomplish air plasma cutting.
• Cutting up to 30mm thickness plate ( Mild Steel & Stainless Steel)

TIG DC Lift-Arc (GTAW)

• Convenient welding for stainless steel, mild steel, bronze alloy, nickel alloy, titanium, low alloy steel.

MIG (GMAW) / (FCAW)

• MIG selector, Inductor Current Control, fine variable voltage control & continuous full range wire feed speed control help you dial in your application.

Specifications

Model	STORM500i
Control Method	IGBT (CC / CV)
Rated Primary Voltage	3 Phase 415V
Frequency	50/60Hz
Rated Primary Input	26KVA
Duty Cycle	60%
Weight	60kg
Dimension L x W x H	590 x 315 x 645

 

MIG (GMAW) | Flux-Cored (FCAW)
Output Current Range	60-500Amp
Output Voltage Range	16-50V
Input Power	29.5KVA
Input AMP	29 Amp

 

Plama (PAC)
Output Current	20-120A
O. C. V	352V
Built-in Compressor	Cut. 25mm
External Air Supply	Cut. 35mm

 

STICK (SMAW) | DC Lift-Arc TIG (GTAW)
Amp. Range	36-440
Output Voltage	31V
O. C. V	108V DC