Details

---

FE1000MS | Mild Steel Floor Drying Oven with Digital Control

Holding temperature: 150ºC

Re-baking temperature: 300ºC-400ºC (for 2 to 4hrs)

External – EG Mild Steel casing with Epoxy

High quality and durable holding, re-baking, and reconditioning electrode oven with a mild steel casing to make a requirement for all certifications of calibration.

• Removable Shelving for use with flux and wire coils
• Even-Heat Distribution – rectangle shape distributes beat by convention
• Heating Element – UL Approval File Note UL1030 (E107991)
• Drive off moisture and get good welds……
• Guard against rejects……
• Eliminate rework……
• Protect welding profits….

A chimney effect that drives air upward along the center support bar, together with the oven’s rectangle shape and vented shelving, allows for exceptional heat flow patterns.

Specifications

Model	FE1000MS
Capacity   Electrode Length	1000kg   457mm electrode
Temperature   Average stabilized	0ºC – 400ºC   Digital Control
Input voltage	415V AC
Electrode size	10”,12”,14”,18”   (254,305,356,457mm)
Heating element	6000watt (8)
Insulation (rock fiber wool)	2″ (50mm)
Shelved compartment	6
Inside diameter L x W x H (mm)	910 x 481 x 800mm
Outside diameter L x W x H (mm)	1170 x 585 x 965mm
Nett weight	200kg